ULTIMAKER 2, 2+ & 3

FLEKS3Db12.jpg
Screen Shot 2016-12-07 at 3.04.15 PM.png
Screen Shot 2016-12-07 at 3.04.32 PM.png
Screen Shot 2015-11-03 at 1.44.55 PM.png
Screen Shot 2016-12-07 at 3.03.58 PM.png
insta-Ulti.png
FLEKS3D-simple-instructions.png
FLEKS3D_texture.jpg
FLEKS3Db12.jpg
Screen Shot 2016-12-07 at 3.04.15 PM.png
Screen Shot 2016-12-07 at 3.04.32 PM.png
Screen Shot 2015-11-03 at 1.44.55 PM.png
Screen Shot 2016-12-07 at 3.03.58 PM.png
insta-Ulti.png
FLEKS3D-simple-instructions.png
FLEKS3D_texture.jpg

ULTIMAKER 2, 2+ & 3

35.00

INCLUDES: one (1) FLEKS3D™ build plate

see it in action here: https://youtu.be/JtLK9eme4nk

 

This FLEKS3D works for ULTIMAKER 2 and 2+. It also works for the new ULTIMAKER 3. Simply replace the standard glas plate with the FLEKS3D and you are good to go. You can either squeeze the clips for a tight fit. Or use blue tape on the edges. Please see picture.

ULTIMAKER 3 - This machine has an auto-leveling feature that presses the hot end into the build bed. This will melt our product. Use the “puck” (please see our product page) for the initial setup, then turn off the auto-level for each print. You can also turn it off all together and do a manual level. They made it so easy to manual level on these machine, you almost wonder why they bother with the auto level.

Anymore questions, refer to our support page http://www.fleks3d.com/support/

Quantity:
Add To Cart